.

Friday, August 9, 2019

Manufacturing Engineering Lab Report Example | Topics and Well Written Essays - 500 words

Manufacturing Engineering - Lab Report Example SafetySince the device may be improperly used and safety of a machinery is the key concern during its functionality; a safety factor of 1.5 was factored in all the calculations. 2.2 InexpensiveThe device must be produced within a strict budget by sourcing for cheap local materials according to the bill of quantities.2.3 Design EvolutionThe first concept generation was accomplished by creating an itemization of the design into the following functional and movable elements; pipes, chains and the support system.The team had a brainstorming session, whereby it was agreed that only the top rated materials will be considered for each functional component in order to develop an alpha design. The criteria for selecting components were based on the cost of the material and its manufacturability.3.0 Engineering AnalysisThe engineering fields that are applicable to the design process are statics, dynamics and materials. The appropriate basics and ideas from statics and dynamics are Newtonâ€⠄¢s law, bending moments, torque and friction. For materials mostly on the pipes and chains, the applicable properties are: fracture toughness, Young’s modulus, corrosion, yield strength and ultimate tensile strength.Newton’s Second law, was necessary to calculate the forces that will be applied to the support while the chain moves up and down while lifting an object. The bending moments, of the motor was calculated to ensure the mechanism does not degrade rapidly and maintain the factor of safety.

No comments:

Post a Comment